DICE ipod BMW Z4 Installation

April 26, 2009 Filed Under: BMW

dice-ipod-bmw-z4-installation

This “how to” guide installs the kit into a BMW Z4 with no CD changer and a standard business cd (no sat nav), ipod location in the central compartment.
1.The kit
2. Disconnect battery with 10mm socket
3. Get easier access to centre console I removed the boot carpet. Use a large flat head screwdriver to remove the retaining screws on the left and the right hand side of the boot. You need to reach behind the carpet to hold the nut at the back
4. In the centre you’ll see the access to the centre console, where the cd changer would be (or is, if installed). Locate 2 loose wires: a 3, and a 6 pin connector. In mine, I eventually found them on the far left hand side of the compartment. Pull the wires out into the boot, and then connect to the DICE ipod BMW Z4 interface cable.
5. connect the docking cable to the DICE ipod BMW Z4 module then reconnect your battery. Plug in the ipod to the docking cable.
6: Follow the instructions in the user manual. Once I was confident it worked, I fed the docking cable through from the cockpit into the boot and then pulled it through the centre compartment and reconnected it to the DICE ipod BMW Z4 module.

Download DICE ipod BMW Z4 Installation

Source: www.sixspeed.net

Free Magazine